How we manufacture it? Well it can be explained in 6 stages:-   1- The dyer prepares the wool by boiling it with a mordant (a type of fixative, generally alum). Alternatively the due matter can be mixed with a mordant as part of the dyeing process. Irrespective of which method is used, water is added and a jar  or vat is than heated over a fire. Different mordant produce different tones of colour when they are immersed with same due matter. Deeper shades require several immersions of the final tone. Instead of the above procedure, the fermentation process can be followed, where the preparation is sealed in large jars and left in strong sunlight. The vat process, however, is quicker and more reliable as the temperature can be controlled more easily.     2- After dyeing the carpet is laid out in the sun for drying. This process takes about 3-4 days in the evening to protect it from due it is brought inside and again placed in the sun in the morning.     3- Weaving: Young boys who have already have the technical skill, are employed in weaving carpets. This is usually conducted indoors. It is time consuming and requires careful craftsmanship for which these employees are well rewarded.     4- Washing: Most of the carpets are washed in the open with soap and left to dry in the sun. Since these are sun dried the carpets / rugs do not have any odour in them, they are fresh to look at and retain their silky touch.      5- Trimming: An essential technique is the process of trimming carpets, once it has been washed and dried. Trimming is a skilful art which requires careful observation and steady hands to give the finish product a professional look.     6- Turkmencarpets offer good craftsmanship, excellent customer service and a wide selection of carpets that can also be ordered for personal requirement. Visit our website and get in touch with our shop, for the best services in Pakistan. We assure you, we will provide you excellence in our services.